| Measuring range | 0…100 ppm |
| Solution | 0.01 ppm |
| Accuracy | < ± 2 % |
| Reaction time | < 30 seconds |
| Data storage | up to 500 datasets |
| Operation temperature | 5 … 40 °C |
| Power Supply | Li-ion battery (3.7 V/1200 mAh) AC-adapter 100 … 240 V to 5 VDC / 1 A |
| Operation time | 6 hrs. with batteries |
| Dimensions | 80 x 36 x 150 mm |
| Weight | approx. 200g |
| Interference with measuring rate of formaldehyde |
|
| Chemical | Formaldehyde equivalent |
| 100 ppm methanol | 1 ppm |
| 100 ppm ethanol | 1 ppm |
| 100 ppm isopropanol | 0.5 ppm |
| 100 ppm CO | 1 ppm |
| 25 ppm phenol | 0.05 ppm |
| 100 ppm acetaldehyde | 0.5 ppm |
| 100 ppm hydrogen | 3 ppm |
| 50 ppm hydrogen sulphide | 0.5 ppm |
| 50 ppm sulphur dioxide | 0.5 ppm |
Formaldehyde Meter HFX205-100
This Alert Meter is designed to detect formaldehyde in air. The Alert Meter shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Alert Meter runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds. The concentration is measured in ppm units. Some substances such as ethanol, propanol or methanol can interfere with the measuring data. An optionally purchasable hygrometer-sensor allows for a correction of the measured data in order to achieve accurate measurements.
Related products
-
-
OtherSi-AQ VOC Monitor
-
OtherPIC 40 Videoscope
-
-
